Category: TØØLS

Trying to heat-test some Nitto and Chukoh PTFE adhesive tapes

  • April 7, 2021
Categories
Contrivances HerpDerp Mucking About With Things Sodding soldering TØØLS
The “before” view of my second experimental setup. Three types of PTFE tape, two PTFE-impregnated glass fiber tapes and one straight PTFE tape, all with silicone adhesive, under test. How do you hold components in place while soldering? Not the PCBs on which the components are mounted. PCB holders and PCB vises can be pricey […]

My first taken-through-microscope soldering video

  • April 4, 2021
Categories
Mucking About With Things Personal Firsts Sodding soldering To see a world in a grain of sand TØØLS
Animated GIF clip of me soldering one pin on a breakout board. This afternoon, I soldered some breakout boards and recorded the process using the camera on my recently-acquired microscope (a SHOCREX 3800W) and used my other recent purchase (a QUICK 6601 solder fume extractor and purifier) to deal with the flux smoke instead of […]

Mushy bars of soap: testing a countermeasure

  • April 4, 2021
Categories
Contrivances Mucking About With Things The Diary of Lupin Pooter TØØLS
The plastic countertop soap dishes we’ve gotten have ridges intended to keep the soap bar a millimeter or so above the rest of the dish surface. Those ridges are a bit on the wide, long, and numerous side, however, and the result is that the parts of the bar that contact the ridges stay moist longer than the rest of the bar and those areas often feel mushy the next time one grabs the soap.

Quick 6601 solder fume extractor and purifier

  • April 3, 2021
Categories
HerpDerp Mucking About With Things Sodding soldering The Diary of Lupin Pooter TØØLS
Top of my Quick 6601 solder fume extractor and purifier, with the tethered remote control and not-yet consulted Chinese-language instruction manual resting next to the base of the flexible duct. There wasn’t much assembly involved. One end of the flexible duct slides onto the flange mounted atop the machine and attaching the flared rubber intake […]

New microscope for the workbench

  • April 2, 2021
Categories
Mucking About With Things The Diary of Lupin Pooter To see a world in a grain of sand TØØLS
Snapshot of the screen showing part of the calibration card included with the microscope’s camera. The magnification goes much higher but this is the highest at which a meaningful bit of the card is visible. I recently acquired a new workbench microscope (a SHOCREX 3800W) from the manufacturer’s (or rebadger and reseller’s) Tmall store. I […]

Chrome Vanadium Chinesium: Finest quality. Superior workmanship.

  • May 1, 2019
Categories
HerpDerp Mucking About With Things The Diary of Lupin Pooter TØØLS
A recent haphazard domestic DIY escapade furnished me with the above photo: replacing the shredded sisal twine and fabric on our cats’ scratching posts. The sisal materials were fixed in place using beefy little round-crown staples, so I ordered some staple removers (the ones with a screwdriver form factor, ending in what looks like chisel-edged, […]